Please use this identifier to cite or link to this item: https://repositorio.udes.edu.co/handle/001/3144
Title: Compression tests performed in reinforced rigid matrix composite varying the reinforcement material
Authors: Martínez Amaríz, Alejandro David
Ruiz Florián, C.A.
González Estrada, O.A.
Pertuz Comas, A.D.
Arguello Bastos, J.D.
Issue Date: 2018
Abstract: In this work, we investigate the behavior under compression for a nylon-matrix composite, reinforced with Kevlar, fiberglass, and carbon fiber. The composite is produced by additive manufacturing (AM) using fused deposition modeling (FDM). The specimens are printed with the Markforged Mark Two 3D printer, following the ASTM D3410 standard. The tests are performed by changing the reinforcement material, the filling pattern is fixed to a triangular shape, the angle at 0◦ and we use 12 layers for all the specimens. Kevlar reinforcement shows a non-linear elastic response for the stress-strain curve, whilst carbon fiber and fiberglass reinforcements show linear elastic behavior. Results indicate that the incidence of a particular failure mode is highly dependent on the type of material used in the reinforcement.
Description: 7 p.
URI: http://repositorio.udes.edu.co/handle/001/3144
ISSN: 1742-6596
1742-6588
Appears in Collections:DEABA. Artículos de Investigación

Files in This Item:
File Description SizeFormat 
Compression tests performed in reinforced rigid matrix composite varying the reinforcement material.pdfDocumento Principal264.22 kBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons